Summit Doppler Vista ABI - Automated ABI System SDNABIL450VA
L450VA.jpgSummit-Doppler-Vista-AVS-Test-Patient.jpgSummit-Doppler-Vista-Vascular-System-ABI.jpgSummit-Doppler-Vista-ABI-Ankle-Test.jpg

Summit Doppler Vista ABI - Automated ABI System

SDNABIL450VA In Stock
Request for Quote

requestquotebutton.jpg


The Vista ABI is a full-featured ABI system designed to make the ABI exam faster and easier to conduct, interpret and document. Navigate through the system using an on-screen guide and hand-held controller. The Vista ABI was designed to accommodate single level exams and can be ordered with optional PC software and PPG probe. The Vista ABI does not accommodate segmental exams.

The features and benefits of the Summit Doppler AVI, include, but are not limited to:


  • Obtains two pressures at each ankle site (PT and DP)

  • Automatic cuff inflation and deflation system

  • Graphic waveform display with step-by-step instructions

  • Automatic ABI calculation

  • Perform the Seated ABI on mobility impaired patients

  • Bi-Directional Doppler probe (8 MHz) with 4 blood pressure cuffs

  • Pulse Volume Recording (PVR) waveform modality

  • Full 1-year product warranty
  •  

    Product Reviews

    Write a Review for this Product

    Rating
    Your Review
     

    Product files

    Summit Doppler Vista ABI Specifications

    Display Screen:
  • Size: 5.7 inch, ¼ VGA (320 x 240 dot)
  • Backlight: LED Backlight
  • Type: Transflective Monochrome

  • Device Dimensions:
  • Width: 12 inches
  • Depth: 3.6 inches
  • Height: 10 inches
  • Weight: 4.75 lbs
  • Stand Height: 47 inches

  • Electrical Power:
  • Type: Medical Grade Supply
  • Rated Mains Supply Voltage: 100-240VAC, 50-60Hz, 1.2A
  • Output: +7V, 5A

  • Battery:
  • Type: 6-cell NiMH pack
  • Rating: 7.2V, 2000 maHr
  • Replacement Part No: B200
  • Battery Life: 3 hours continuous use or minimum of 12 ABI Exams
  • Replacement Interval: 1 year
  • Charge Time: 3 hours

  • Doppler:
  • Doppler Type: Bi-Directional, Continuous-Wave (CW)
  • Audio Bandwidth: >4 KHz
  • Waveform Display: Digital Mean Frequency Estimator; Separate Forward and Reverse Flow Waveforms
  • Available Probe Frequencies: 8.43MHz, 5.5 MHz
  • Displayed Waveform Amplitude Accuracy: +/-10%
  • Speaker Output: > 0.25 W
  • Speaker Type: 2 inch, 5 W
  • Cable length: 6.5 ft
  • Volume Control: Continuously variable with mute

  • Photoplethysmography (PPG) (Optional):
  • Wavelength: 940 nm
  • Artifact Rejection: Synchronous demodulation, AC coupled output
  • Operating Frequency: 1KHz
  • Cable length: 6.5 ft

  • Pressure:
  • Range: 0 – 265 mmHg
  • Accuracy: +/-3 mmHg 0 – 200 mmHg, +/-2% above 200mmHg
  • Bleed Rate: 2.5 mmHg/sec nominal
  • PVR: 0.16 to 12.5 Hz bandwidth, AC Coupled

  • Safety:
  • Pressure released if greater than 280 mmHg
  • Pressure released if held above 100 mmHg beyond 3 minutes
  • Pressure released if held between 30-100 mmHg beyond 5 minutes (Operator may over-ride for exam purposes)
  • Redundant Control

  • Data Storage and Transfer:
  • Storage: 10 storage locations, 16 numeric or 24 alpha character length filenames
  • Type: USB 2.0
  • Connector: Peripheral
  • Output: Optional AVS Report Software (model # L450SF) – Adobe PDF or comma delimited
  • Accessories

    Packages:
  • PPG Package (L450PG):Includes PPG probe & digit cuff
  • AVS Software Package (L450SF): PC download capability

  • Cuffs and Tubing:
  • Cuff (CUF0002): 10 cm
  • Cuff (CUF0003): 12 cm
  • Cuff (CUF0004): 1.9 cm
  • Cuff (CUF0005): 2.5 cm
  • Hose Set (ASY0008)

  • Cables:
  • Doppler (CBL0018)
  • USB (CBL0024): 6 feet

  • Printer Paper:
  • ABI Printer Label Paper (K180): Box of 5 rolls

  • Gel:
  • Ultrasound Gel (G150): 60 g
  • Ultrasound Gel (G155): 250 g

  • Probes:
  • Bi-Directional Probe (SD5B): 5MHz (for L250AB/L250AC)
  • Bi-Directional Probe (SD8B): 8MHz (for L250AB/L250AC)
  • Bi-Directional Probe (SD5V): 5 MHz (for Vista AVS/Vista ABI)
  • Bi-Directional Probe (SD8V): 8 MHz (for Vista AVS/Vista ABI)
  • PPG (SPPG)

  • Battery Pack:
  • Battery (B200): 7.2 V
  • Roll Stand with Basket (K270)
  • Reimbursements

    CPT Code 93922


    • Peripheral arterial waveforms are required for billing
    • This code has an average billing rate of $114 per study
    • This is based on the average Medicare Fee Schedules, CMS Part B Contractors, 2011
    • Check with your Medicare Provider
    • These medical studies must be necessary medically in order to receive reimbursement
    • All Medical Providers need to check with a third-party payer for specific coverage coding